"[Preset]"
"PresetName=HF DC Shell 2977792 (C) - RL"
"Padlock=0"
"BFB_Start_Frequency=5000"
"BFB_Finish_Frequency=1800000"
"BFB_Include_Octave=0"
"BFB_Single_Scan=1"
"BFB_Grade_Program=0"
"BFB_2DP_Max=1"
"BFB_Initial_Step_Size_Hz=100"
"BFB_Initial_Step_Size_Hz_Selected=False"
"BFB_Initial_Step_Size_%=.025"
"BFB_Initial_Step_Size_%_Selected=True"
"BFB_Decimal_Places=0"
"BFB_Max_Hits_To_Find=10"
"BFB_Start_Delay=200"
"BFB_Samples_Per_Step=1"
"BFB_Loops=2"
"BFB_Threshold=.05"
"BFB_Refine_Hz=10"
"BFB_Reverse_Lookup_Tolerance=.25"
"BFB_Include_x_Hz_In_Search=0"
"BFB_Calculate_Using_RA=True"
"BFB_Calculate_Using_Peak=False"
"BFB_BPM=False"
"BFB_HRV=False"
"BFB_Angle=False"
"BFB_Detect_Max=True"
"BFB_Detect_Min=False"
"BFB_Detect_Change=0"
"BFB_After_Scan_Run_Hits=1"
"BFB_Repeat_BFB=1"
"BFB_After_Scan_Run_On_Gen=0"
"BFB_Continue_Refining_Hits=0"
"BFB_Detect_mA=True"
"BFB_Detect_Angle_And_mA=False"
"BFB_Min_BPM=30"
"BFB_Max_BPM=130"
"BFB_Max_HRV=20"
"Amplitude_Modulation_Enabled=0"
"Repeat_Each_Frequency=1"
"Repeat_Each_Program=1"
"Repeat_Sequence=0"
"Repeat_Chain=1"
"Frequency_Slider_Scale=1"
"Frequency_Multiplier=1"
"Out1_Phase_Angle=0"
"Duty_Cycle=50"
"Email_Address="
"Out1_Amplitude=20"
"Out1_Offset=-100"
"Out2_Hz_Factor=1"
"Out2_Hz_Constant=0"
"Swap_Waveform_Time=0"
"Out1_Shadow_Generator=0"
"Out1_Shadow_Hz_Factor=0"
"Out1_Shadow_Hz_Constant=0"
"Schedule_Run_For=0"
"Schedule_Delay_Start_Days=0"
"Schedule_Delay_Start_Hours=0"
"Schedule_Delay_Start_Minutes=0"
"Out1_Fixed_Frequency_Hz=2977792"
"Out2_Amplitude=20"
"Out2_Offset=100"
"Out2_Phase_Angle=0"
"Preset_Notes=When two frequencies are mixed, one of the things that comes out of the reaction is a third frequency which is the difference between the two. For example, if you mix 1000 Hz with 100 Hz, one of the things that would come out of this is 900 Hz. This preset makes use of this principle. We mix two high frequencies such that the difference between the two is the frequency that we want to apply.

2977792 Hz is an upper octave of 727 Hz. This preset is designed to run 2977792 Hz along with a second frequency so that the difference between the two will be the frequency that we want to apply. The second frequency is produced by subtracting the desired target frequency from 2977792. For example, if a program using 3133 Hz is selected, the preset will subtract that from 2977792. It will then run 2977792 and 2974659 at the same time. This is a very effective way to apply 3133 Hz.

The original preset was developed by Brad Rothman
brad@cornerstonecodes.com
https://www.cornerstonecodes.com

It was originally presented by him at https://www.spooky2.com/forums/viewtopic.php?f=117&t=10093 .

It was modified to use 2977792 Hz as the 'Out 1 fixed at' frequency. It was also modified to use a DC offset square wave.

This shell preset is optimized to use frequencies less than 10000 Hz. When choosing programs from the Programs tab, it may be best to select programs where the majority of the frequencies are under 10000 Hz.

This shell produces a 100% positive offset signal to the Spooky2 boost High Power and the Colloidal Silver outputs for use with hand cylinders. This preset is very effective for pathogen reduction and also for mold toxins reduction. Use of a layer or two of wet paper towel around the hand cylinders will speed up toxin reduction.

It is suggested that the run time for the first session be under 5 minutes.

CAUTION: It is suggested that the application of DC offset dignals be to the palms of the hands or soles of the feet only. Use of metal or adhesive electrodes to more sensitive areas of skin may result in electrical burns.

CAUTION: Do not use contact mode if you have implanted electronic devices.

- Richard Loyd, Ph.D."
"Settings_Frequency_Wobble_Percentage=0"
"Settings_Amplitude_Wobble_Steps=16"
"Settings_Amplitude_Wobble_Percentage=0"
"Settings_Frequency_Wobble_Steps=16"
"Out1_Max_Freq=0"
"Out1_Min_Freq=0"
"Out2_Max_Freq=0"
"Out2_Min_Freq=0"
"Hz_Gate=4"
"Reduce_Amplitude_Frequency=10"
"Gating_mS_On=125"
"Gating_mS_Off=125"
"Dwell_Multiplier=1"
"Sine_WCM=1"
"Square_WCM=1"
"Sawtooth_WCM=1"
"Inverted_Sawtooth_WCM=1"
"Triangle_WCM=1"
"Sine_Damped_WCM=8"
"Square_Damped_WCM=8"
"Sine_Hbomb_WCM=16"
"Square_Hbomb_WCM=16"
"User_Defined_1_WCM=1"
"User_Defined_2_WCM=2"
"Sine_Spike_Length=0"
"Square_Spike_Length=0"
"Sawtooth_Spike_Length=0"
"Inverted_Sawtooth_Spike_Length=0"
"Triangle_Spike_Length=0"
"SineDamped_Spike_Length=0"
"Square_Damped_Spike_Length=0"
"Sine_Hbomb_Spike_Length=0"
"Square_Hbomb_Spike_Length=0"
"User_Defined_1_Spike_Length=0"
"User_Defined_2_Spike_Length=0"
"Sine_Spike_Ratio=2"
"Square_Spike_Ratio=2"
"Sawtooth_Spike_Ratio=2"
"Inverted_Sawtooth_Spike_Ratio=2"
"Triangle_Spike_Ratio=2"
"Sine_Damped_Spike_Ratio=2"
"Square_Damped_Spike_Ratio=2"
"Sine_Hbomb_Spike_Ratio=2"
"Square_Hbomb_Spike_Ratio=2"
"User_Defined_1_Spike_Ratio=2"
"User_Defined_2_Spike_Ratio=2"
"Sine_Spectrum=0"
"Square_Spectrum=0"
"Sawtooth_Spectrum=0"
"Inverted_Sawtooth_Spectrum=0"
"Triangle_Spectrum=0"
"Sine_Damped_Spectrum=0"
"Square_Damped_Spectrum=0"
"Sine_Hbomb_Spectrum=0"
"Square_Hbomb_Spectrum=0"
"User_Defined_1_Spectrum=0"
"User_Defined_2_Spectrum=0"
"F1_Factor=1"
"F1_Phase_Angle=0"
"Maximum_Spike_Count=0"
"F1_Modulation_Type=Add F1 to F2"
"Harmonic_Wobble=None"
"Custom_Wobble="
"Settings_Harmonic_Wobble_Down=0"
"Schedule_Run_From=Midnight"
"Schedule_Run_To=Midnight"
"Stop_When_Complete=0"
"Frequency_Limit_Harmonic_Type=Octave"
"Frequency_Sort_Option=Do NOT sort frequencies"
"Amplitude_Wobble_Type=Disabled"
"Frequency_Wobble_Type=Disabled"
"User_Defined_1_Waveform=UDB_Square"
"User_Defined_2_Waveform=Sine"
"Auto_Start=False"
"Auto_Resume=False"
"Manual_Start=True"
"Out2_Follow_Out1_Frequency=False"
"Out1_Fixed_Frequency=True"
"Gate_Hz_Option=True"
"Gate_On_Off_Duration_Option=False"
"Out1_Sine=False"
"Out1_Square=True"
"Out1_Sawtooth=False"
"Out1_Inverted_Sawtooth=False"
"Out1_Triangle=False"
"Out1_Sine_Damped=False"
"Out1_Square_Damped=False"
"Out1_Sine_Hbomb=False"
"Out1_Square_Hbomb=False"
"Out1_User_Defined_1=False"
"Out1_User_Defined_2=False"
"Out2_Sine=False"
"Out2_Square=True"
"Out2_Sawtooth=False"
"Out2_Inverted_Sawtooth=False"
"Out_2_Triangle=False"
"Out2_Sine_Damped=False"
"Out2_Square_Damped=False"
"Out2_Sine_Hbomb=False"
"Out2_Square_Hbomb=False"
"Out2_User_Defined_2=False"
"Follow_Out2=False"
"Spike_Plus_Sync=False"
"Inverse_Plus_Sync=False"
"Positive_Waveform_Only=False"
"Negative_Waveform_Only=False"
"Boost_Graph_MN=True"
"Boost_Graph_BN=False"
"Enable_F2_Modulation=0"
"Enable_Reduce_Low_Frequency_Amplitude=0"
"Enable_Gate_Out1=0"
"Enable_Gate_Out2=0"
"Enable_Tissue_Factor=0"
"Enable_Remove_Duplicate_Frequencies=0"
"RunFrequencyBetweenPrograms=0"
"FreqToAdd=0"
"FreqToAddDwell=0"
"Enable_Positive_Spike=1"
"Enable_Negative_Spike=1"
"Negative_Edge_For_Spike=0"
"Enable_Invert_Sine=0"
"Enable_Invert_Square=0"
"Enable_Invert_Sawtooth=0"
"Enable_Invert_Inverted_Sawtooth=0"
"Enable_Invert_Triangle=0"
"Enable_Invert_Sine_Damped=0"
"Enable_Invert_Square_Damped=0"
"Enable_Invert_Sine_Hbomb=0"
"Enable_Invert_Square_Hbomb=0"
"Enable_Invert_User_Defined_1=0"
"Enable_Invert_User_Defined_2=0"
"Enable_Invert_Spike_Waveform=0"
"Enable_Amplitude_RampUp=0"
"Enable_Amplitude_Ramp_Down=0"
"Enable_Swap_Frequency_And_Amplitude=0"
"Notify_When_Zero_Hz=1"
"Out2_Subtract_DataBase_Frequency=0"
"[/Preset]"